[1] 熊田雅弥, 仲戸川哲人, 平田賢, 衝突噴流による熱および物質伝達について, 日本機械学会誌, 76-655 (1973), 12.

[2] Martin, H., Heat and Mass Transfer between Impinging Gas Jet and Solid Surfaces, Adv. Heat Transfer, 13 (1977), 1.

[3] Viskanta, R., Heat Transfer to Impinging Isothermal Gas and Flame Jets, Exp. Thermal&Fluid Science, 6 (1993), 111.

[4] Jambunathan, K., Lai, E., Moss, M.A.&Button, B.L., A review of heat transfer data for single circular jet impingement, Int. J. Heat & Fluid Flow, 13-2 (1992), 106.

[5] Webb, B.W.& Ma, C.-F., Single-Phase Liquid Jet Impingement Heat Transfer, Adv. Heat Transfer, 26 (1995), 105.

[6] 笠木伸英, 乱流のスマート･コントロールに向けて, 日本航空宇宙学会30周年記念講演会講演集 (1999), 47.

[7] 笠木伸英, 乱流のアクティブフィードバック制御, 日本機械学会論文集(B編), 67-658 (2001), 2.

[8] Gad-el-Hak, M., Mordern developments in flow control, Appl. Mech. Rev., 49-7 (1996), 365.

[9] Gad-el-Hak, M., Pollard, A., &Bonnet, J.-P., (editors), Flow Control: Fundamentals and Practices, Springer-Verlag, Berlin 1998.

[10] Hyder, S.H., Bridge, J.E.&Hussain, A.K.M.F., Turbulence Management in Free Shear Flows by Control of Coherent Structure, Int. Symp. Transport Phenomena in Turbulent Flows, ed. M. Hirata, N. Kasagi, 1988, 111.

[11] Kibens, V., Jet Flows and Turbulence Control, AIAA Paper 89-1051 (1989).

[12] 笠木伸英, 乱流現象の制御-その展望-, 日本機械学会

[No.920-75]セミナー教材, 乱流の制御とその応用 (1992), 1.

[13] Fernholz, H.H., Management and Control of Turbulent Shear Flows, ZAMM 73 (1993) 11, 287.

[14] Moin, P.&Bewley, T., Feedback control of turbulence, Appl. Mech. Rev., 47-6-2 (1994), S3.

[15] Gutmark,E.J., Schadow, K.C.&Yu, K.H., Mixing Enhancement in Supersonic Free Shear Flows, Ann. Rev. Fluid Mech., 27 (1995), 375.

[16]笠木伸英, 佐竹信一, 乱流制御とDNS, ながれ, 16 (1997), 188.

[17] Lumley, J.&Blossey, P., Control of Turbulence, Ann. Rev. Fluid Mech., 30 (1998), 311.

[18] Kasagi, N., Progress in direct numerical simulation of turbulent transport and its control, Int. Heat & Fluid Flow, 19 (1998), 125.

[19] Gutmark, E.J.&Grinstein, F.F., Flow Control with Noncircular Jets, Ann. Rev. Fluid Mech., 31 (1999), 239.

[20] Corrsin, S., Investigations of flow in an axially symmetrical heated jet of air, NACA Wartime Rep., W-34, (1943).

[21] Brown, G.L.&Roshko, A., On density effects and large structure in tuebulent mixing layers, J. Fluid Mech., 63-4 (1974), 775.

[22] Cantwell, B.J., Organized Motion in Turbuent Flow, Ann. Rev. Fluid Mech., 13 (1981), 457.

[23] Hussain, A.K.M.F., Coherent structures ? reality and myth, Phys. Fluids, 26-10 (1983), 2816.

[24] Hussain, A.K.M.F., Coherent structures and turbulence, J. Fluid Mech., 173 (1986), 303.

[25] Liu, J.T.C., Coherent Structures in Trasitional and Turbulent Free Shear Flows, Ann. Rev. Fluid Mech., 21 (1989), 285.

[26] Robinson, S.K., Coherent Motions in the Turbulent Boundary Layer, Ann. Rev. Fluid Mech., 23 (1991), 601.

[27] Thomas, F.O., Structure of mixing layers and jets, Appl. Mech. Rev., 44-3 (1991), 119.

[28] Mankbadi, R.R., Dynamics and control of coherent structure in turbulent jets, Appl. Mech. Rev., 45-6 (1992), 219.

[29] Ho, Chih-Ming.&Tai, Yu-Chong, Micro-Electro-Mechanical ?System (MEMS) and Fluid Flows, Ann. Rev. Fluid Mech., 30 (1998), 579.

[30] 鈴木宏明, 島宏樹, 笠木伸英, 鈴木雄二, 下山勲, 三浦宏文, 乱流能動制御のためのフラップ型電磁アクチュエータの開発研究，日本機械学会第75期通常総会講演会講演論文集, 98-1(�V) (1998), 259.

[31] 鈴木宏明, 島宏樹, 笠木伸英, 鈴木雄二, 下山勲, 三浦宏文, フラップ型電磁アクチュエータ群による噴流構造の能動制御，第35回日本伝熱シンポジウム講演論文集 (1998), 657.

[32] 大坂典子, 鈴木宏明, 笠木伸英, 鈴木雄二, フラップ型電磁アクチュエータ群による噴流構造の能動制御(第2報)，日本機械学会年次大会講演論文集, 99-1(IV) (1999), 59.

[33] 鈴木宏明, 笠木伸英, 鈴木雄二，インテリジェント･ノズルにより制御される軸対称噴流の分岐挙動, 日本機械学会熱工学講演会 (1999), 103.

[34] 鈴木宏明, 笠木伸英, 鈴木雄二，インテリジェント･ノズル噴流の分岐･混合機構, 第36回日本伝熱シンポジウム講演論文集 (1999), 333.

[35] 鈴木宏明, 笠木伸英, 鈴木雄二，フラップ型マイクロ電磁アクチュエータ群による軸対称噴流の能動制御, 日本機械学会論文集(B編), 65-639 (1999), 3644.

[36] 堀内康広, 吊児耶大輝, 鈴木雄二, 笠木伸英, 小型燃焼器モデル内同軸二重円形噴流の能動混合制御, 第37回日本伝熱シンポジウム講演論文集 (2000), 873.

[37] 栗本直規, 鈴木雄二, 笠木伸英, インテリジェントノズルを用いた混合促進による燃焼場の能動制御, 第38回日本伝熱シンポジウム講演論文集 (2001), 27.

[38] 鈴木雄二, 笠木伸英, アクチュエータ群を用いた円形噴流のアクティブ制御, 日本機械学会2001年度年次大会講演論文集(II) (2001), 127.

[39] Wiltse, J.M.&Glezer, A., Direct excitation of small-scale motions in free shear flows, Phys. Fluids, 10-8 (1998), 2026.

[40] Wiltse, J.M.&Glezer, A., Direct High-Frequency Excitation of Turbulence in Free Shear Flows, AIAA Paper 96-0309 (1996).

[41] Smith, B.L.&Glezer, A., The formation and evolution of synthetic jets, Phys. Fluids, 10-9 (1998), 2281.

[42] Smith, B.L., Trautman, M.A.&Glezer, A., Controlled Interactions of Adjacent Synthetic Jets, AIAA Paper 99-0669 (1999).

[43] 鈴木雄二, 笠木伸英, 壁乱流の知的能動制御, セーブメーション･レビュー｢マイクロフローセンサ特集号｣, (株)山武技報, (2001), 50.

[44] Aberge, F.l&Temam, R., On some control problems in fluid mechanics, Theor. Comput. Fluid　Dyn., 1 (1990), 303.

[45] Choi, H., Teman, R., Moin, P.&Kim, J., Feedback control for unsteady flow and its application to the stochastic Burgers equation, J. Fluid Mech., 245 (1993), 509.

[46] Lee, C., Kim, J.&Choi, H., Suboptimal control of turbulent channel flow for frag reduction, J. Fluid Mech., 358 (1998), 245.

[47] Lee, C., Kim, J., Babcock, D.&Goodman, R., Appli-cation of neural networks to turbulence control for drag reduction, Phys. Fluids, 9-6 (1997), 1740.

[48] Joshi, S.S., Speyer, J.L.&Kim, J., A systems theory approach to the feedback stabilization of infinitesimal and finite-amplitude disturbances in plane Poiseuille flow, J. Fluid Mech., 332 (1997), 157.

[49] Landreth, C.C.&Adrian, R.J., Impingement of a low Reynolds number turbulent circular jet onto a flat plate at normal incidence, Exp. Fluids, 9 (1990), 74.

[50] 榊原潤, 菱田公一, 前田昌信, 二次元衝突噴流のよどみ域における渦構造と熱伝達(PIVとLIFによる速度･温度場の同時計測), 日本機械学会論文集(B編), 60-573 (1994), 1538.

[51] Sakakibara, J., Hishida, K.&Maeda, M., Vortex structure and heat transfer in the stagnation region of an impinging plane jet (simultaneous measurements of velocity and temperature fields by digital particle image velocimetry and laser induced fluorescence), Int. J. Heat & Mass Transfer, 40 (1997), 3163.

[52] Sakakibara, J., Hishida, K.&Phillips, W.R.C., On the vortical structure in a plane impinging jet, J. Fluid Mech., 434 (2001), 273.

[53] 西野耕一, 佐間田正憲, 糟谷圭一, 鳥居薫, 軸対称衝突噴流よどみ領域の乱流特性, 日本機械学会論文集(B編), 62-594 (1996), 64.

[54] Sakakibara, J., Hishida, K.&Maeda, M., Measurements of Thermally Stratified Pipe Flow using Image Processing Techniques, Exp. Fluids, 16 (1993), 82.

[55] 矢野雅崇, 五十嵐保光, 菱田公一, 前田昌信, 軸対称衝突噴流よどみ域における熱伝達機構, 第35回日本伝熱シンポジウム講演論文集 (1998), 663.

[56] 五十嵐保光, 谷直樹, 菱田公一, 前田昌信, 旋回衝突噴流の流動と熱伝達, 第36回日本伝熱シンポジウム講演論文集 (1999), 315.

[57] 五十嵐保光, 野崎篤志, 菱田公一, 旋回衝突噴流の乱流熱伝達機構, 第37回日本伝熱シンポジウム講演論文集 (2000), 879.

[58] Hishida, K., Nozaki, A., Igarashi, Y.&Maeda, M., Velocity and Temperature Mesurements in Heat Transfer of Swirling Impinging Jets, Proc. 4th JSME-KSME Thermal Engng. Conf., Vol.2 (2000), 2-269.

[59] 横堀誠一, 笠木伸英, 平田賢, 二次元衝突噴流のよどみ域における乱流輸送機構に関する研究, 日本機械学会論文集(B編), 49-441 (1983), 1029.

[60] 横堀誠一, 笠木伸英, 平田賢, 軸対称衝突噴流のよどみ域における乱流輸送機構に関する研究, 日本機械学会論文集(B編), 46-440 (1980), 2010.

[61] 土方邦夫, 三松順治, 軸対称衝突噴流の乱流構造の解明, 日本機械学会論文集(B編), 53-487 (1987), 810.

[62] Kataoka, K., Degawa, H., Maruo, K.&Mihata, I., The effect of surface renewal due to large-scale eddies on jet impinging heat transfer, Int. J. Heat Transfer, 30 (1987), 559.

[63] Kataoka, K., Impingement Heat Transfer Augmentation Due to Large Scale Eddies, Proc. 9th Int. Heat Trasfer Conf., Vol.1 (1990), 255.

[64] Saad, N.R., Polat, S.&Douglas, W.J.M., Confined multiple impimging slot jets without crossflow effects, Int. J. Heat & Fluid Flow, 13-1 (1992), 2.

[65] Elavarsan, R., Venkatakrishnan, L., Krothapalli, A.&Lourenco, L., Supersonic Twin Impinging Jets, AIAA Paper 2000-0812 (2000).

[66] Geers, L.F.G., Tummers, M.J., Bart, G..C.J.&Hanjalic, K., LDV and PIV measurements applied to single and multiple impinging jets, Exp. Heat Transfer, Fluid Mech. Thermodynamics 2001, ed., Celata, G.P. et al., (2001), 1201.

[67] Crow, S.C.& Champagne, F.H., Orderly structure in jet turbulence, J. Fluid Mech., 48 (1971), 547.

[68] Zaman, K.B.M.Q.&Hussain, A.K.M.F., Turbulence suppression in free shear flows by controlled excitation, J. Fluid Mech., 103 (1981), 133.

[69] 蒔田秀治, 大谷秀雄, 石角勝利, 音波による噴流構造の制御(第1報,励起モードによる噴流構造の相違について), 日本機械学会論文集(B編), 54-504 (1988), 1938.

[70] 豊田国昭, Hussain, A.K.M.F., 非円形噴流中の渦構造に関する研究, 日本機械学会論文集(B編), 55-514 (1989), 1542.

[71] Hussain, A.K.M.F.&Husain, H.S., Elliptic Jets. Part 1. General Characteristics of Unexcited and Excited Jets, J. Fluid Mech., 208 (1989), 257.

[72] Longmire, E.K., Eaton, J.K.&Elkins, C.J., Control of Jet Structure by Crown-Shaped Nozzles, AIAA J., 30-2 (1992), 505.

[73] Zaman, K.B.M.Q., Reeder, M.F.&Samimy, M., Control of an axisymmetric jet using vortex generators, Phys. Fluids, 6-2 (1994), 778.

[74] Longmire, E.K.&Duong, L.H., Bifurcating jets generated with stepped and sawtooth nozzles, Phys. Fluids, 8-4 (1996), 978.

[75] Rajagopalan, S.&Antonia, R.A., Turbulence reduction in the mixing layer of a plane jet using small cylinders, Exp. Fluids, 25 (1998), 96.

[76] Cho, S.K., Yoo, J.Y.&Choi, H., Vortex pairing in an axisymmetric jet using two-frequency acoustic forcing at law to moderate strouhal numbers, Exp. Fluids, 25 (1998), 305.

[77] Freund, J.B.&Moin, P., Jet Mixing Enhancement by High-Amplitude Fluids Actuation, AIAA J., 38-10 (2000), 1863.

[78] 宮越勝美, 羽二生博之, ノズル内の二次元物体によって励起された二次元噴流の過渡特性(非調和的な励起条件における低周波数速度変動), 日本機械学会論文集(B編), 66-649 (2000), 2298.

[79] 森島隆二, 早川道雄, 飯田誠一, 平面噴流の発達に及ぼす周期かく乱の効果, 日本機械学会論文集(B編), 66-647 (2000), 1719.

[80] 安齋友国, 榊原潤, 励起された平面噴流の三次元渦構造, 第32回乱流シンポジウム講演論文集, .

[81] Ali Khan, M.M., 笠木伸英, 平田賢, 衝突噴流熱伝達の増進技術に関する研究(第2報), 第17回日本伝熱シンポジウム講演論文集 (1980), 37.

[82] Ward, J.&Mahmood, M., Heat Transfer from a Turbulent, Swirling, Impinging Jet, Proc. 7th Int. Heat Transfer Conf., Vol.3 (1982), 401.

[83] Kataoka, K., Ase, H.&Sako, N., Unsteady Aspects of Large-Scale Coherent Structures and Impingement Heat Transfer in Round Air Jets With and Without Controlled Excitation, Int. J. Eng. Fluid Mech., 1 (1988), 365.

[84] Kataoka, K. et al., Control of Jet Impingement Heat Transfer by a Wake Flow Behind an Array of Circular Cylinders, J. Chem. Engng. Japan., 25-1 (1992), 39.

[85] Azevedo, L.F.A., Webb, B.W.&Queiroz, M., Pulsed Air Jet Impingement Heat Transfer, Exp. Thermal&Fluid Sci., 8 (1994), 206.

[86] Priedeman, D., Callahan, V.&Webb, B.W., Enhancement of Liquid Jet Impingement Heat Transfer With Surface Modifications, Trans. ASME J. Heat Transfer, 116 (1994), 486.

[87] Garimella, S.V.&Nenaydykh, B., Influence of Nozzle Geometry on Heat Transfer in Submerged and Confined Liquid Jet Impimgement, Proceedings of the ASME Cooling and Thermal Design of Electronic Systems, HTD-319/EEP-15 (1995), 49.

[88] Liu, T.&Sullivan, J.P., Heat transfer and flow structures in an excited circular impinging jet, Int. Heat & Mass Transfer, 39-17 (1996), 2695.

[89] 社河内敏彦, 岩松朋宜, 安藤俊剛, 安田光博, 円形衝突噴流の流動と伝熱特性 (同軸環状副噴流による制御), 日本機械学会論文集(B編), 62-593 (1996), 248.

[90] 羽田喜昭, 土屋良明, 倉澤英夫, 中部主敬, 鈴木健二郎, 平板への二次元衝突噴流熱伝達に関する研究(小円柱挿入の影響), 第33回日本伝熱シンポジウム講演論文集 (1996), 617.

[91] 檜和田宗彦, 田中真太郎, 田中光三, 親川兼勇, 円形衝突噴流熱伝達に及ぼすタブの影響, 第34回日本伝熱シンポジウム講演論文集 (1997), 63.

[92] Alekseenko, S.V., Bilsky, A.V., Markovich, D.M., Semenov, V.I., Sensitivity of impinging turbulent jets to the external disturbances, 11th Turbulent Shear Flows, 2 (1997), 22-18.

[93] Edmund, A.S.&Ortega, A., Turbulent heat transfer in a forced and unforced two dimensional air jet impinging on an isoflux surface, Proceedings of the ASME Heat Transfer Division, HTD-353(3), (1997), 55.

[94] Gau, C., Sheu, W.Y.&She, C.H., Impinging Cooling Flow and Heat Transfer Under Acoustic Excitations, Trans. ASME J. Heat Transfer, 119 (1997), 810.

[95] Huang, L.&El-Genk, M.S., Heat Transfer and Flow Visualization Experiments of Swirling, Multi-Channel, and Conventional Impinging Jets, Int. J. Heat & Mass Transfer, 41-3 (1998), 583.

[96] Oyakawa, K., Yaga, M., Nasu, K., Senaha, I., Matsuda, S., Azama, T., Impingement Heat Transfer by Jet Issuing from a Cross-Shaped Nozzle, Heat Transfer ? Japanese Research, 27-3 (1998), 192.

[97] 安齋友国, 榊原潤, 平面衝突噴流の渦構造の制御, 日本機械学会熱工学講演会 (1999), 101.

[98] 一宮浩市, 吉田裕, 二次元衝突噴流熱伝達におよぼす衝突面の加振効果, 日本機械学会論文集(B編), 65-637 (1999), 3078.

[99] Hwang, S.D., Lee, C.H.&Cho, H.H, Heat transfer and flow structures in axisymmetric impinging jet controlled by vortex pairing, Int. J. Heat & Fluid Flow, 22 (2001), 293.

[100] Bart, G.C.J., van IJzerloo, A.J., Geers, L.F.G.&Hanjalic, K., Heat transfer of phase-locked modulated impinging-jet arrays, Exp. Heat Transfer, Fluid Mech. Thermodynamics 2001, ed., Celata, G.P. et al., (2001), 943.

[101] 片岡邦夫, 衝突噴流伝熱の促進と制御, 熱流体フォーラムシリーズ1｢熱流体とエネルギー｣, 日刊工業新聞社, 1996.

[102] Galitseyskily, B.M., Jet cooling system of gas turbine blade, Exp. Heat Transfer, Fluid Mech. Thermodynamics 2001, ed., Celata, G.P. et al., (2001), 993.

[103] Sato, H., The stability and transition of a two-dimensional jet, J. Fluid Mech., 7 (1960), 53.

[104] Rockwell, D.O.&Niccolls, W.O., Natural Breakdown of Planer Jets, Trans. ASME Ser.-D, 94-4(1972), 720.

[105] Gutmark, E., Wolfshtein, M.&Wygnanski, I., The plane turbulent impinging jet, J. Fluid Mech., 88-4 (1978), 737.

[106] Gardon, R.&Akfirat, J., The role of turbulence in determining the heat transfer characteristics of impinging jets, Int. J. Heat & Mass Transfer, 8 (1965), 1261.

[107] San, J.Y.& Lai, M.D., Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets, Int. J. Heat & Mass Transfer, 44 (2001), 3997.

[108] Adirian, R.J., Christensen, K.T.&Liu, Z.-C., Analysis and interpretation of instantaneous turbulent velocity fields, Exp. Fluids, 29 (2000), 275.

[109] Goldstein, R.J., Behbahani, A.I.&Heppelmann, K.K., Streamwise distribution of the recovery factor and the local heat transfer coefficient to an impinging circular air jet, Int. J. Heat & Mass Transfer, 29-8 (1988), 1227.

[110] Cooper, D., Jackson, D.C., Launder, B.E.&Liao, G.X., Impinging jet studies for turbulence model assessment-�T. Flow ?field experiments, Int. J. Heat & Mass Transfer, 36-10 (1993), 2675.

[111] Baughn, J.W.B.&Shimizu, S., Heat transfer measurements from a surface with uniform heat flux and an impinging jet, Trans. ASME J. Heat Transfer, 111 (1989), 1096.

[112] Craft. T.J., Graham, L.J.W.&Lauder, B.E., Impinging jet studies for turbulence model assessment-�U. An examination of the performance of four turbulence models, Int. J. Heat & Mass Transfer, 36-10 (1993), 2685.

[113] Polat, S., Huang, B., Mujumdar, A.S.&Douglas, W.J.M., Numerical flow and heat transfer under impinging jets: A review, in: Tien, C.L. (ed.), Ann. Rev. Numer. Fluid Mech. Heat Transfer, Washington, DC, vol.2 (1989), 157.

[114] Huang, G.C., Investigation of Heat-Transfer Coefficients for Air Flow Through Round Jets Impinging Normal to a Heat-Transfer Surface, Trans. ASME J. Heat Transfer, 85 (1963), 237.

[115] Kumada, M.&Mabuchi, I., Studies on the Heat Transfer of Impinging Jet (1st Report, Mass Transfer for Two-Dimensional Jet of Air Impinging Normally on a Flat Plate), Bull. JSME, 13-55 (1970), 77.

[116] Hoogendoorn, C.J., The effect of turbulence on heat transfer at a stagnation point, Int. J. Heat Mass Transfer, 20 (1977), 1333.

[117] Goldstein, R.J.&Timmers, J.F., Visualization of heat transfer from arrays of impinging jets, Int. J. Heat Mass Transfer, 25-12 (1982), 1857.

[118] Looney, M.K.&Walsh, J.J., Mean-flow and turbulent characteristics of free and impinging jet flow, J. Fluid Mech., 147 (1984), 237.

[119] Lytle, D.&Webb, B.W., Air jet impingement heat transfer at low nozzle-plate spacings, Int. J. Heat Mass Transfer, 37-12 (1994), 1687.

[120] Lee, J.&Lee, S-J., Stagnation region heat transfer of a turbulent axisymmetric jet impingement, Exp. Heat Transfer, 12 (1999), 137.

[121] Czeisla, T., Biswas, G., Cjattopadhyay, H.&Mitra, N.K., Large-eddy simulation of flow and heat transfer in an impinging slot jet, Int. J. Heat & Fluid Flow, 22 (2001), 500.

[122] Schlichting, H., (translated by Kestin, J.), Boundary-Layer Theory (7th edition), McGraw-Hill (1979).

[123] Shadlesky, P.S., Stagnation Point Heat Transfer for Jet Impingement to a Plane Surface, AIAA J., 21-8 (1983), 1214.

[124] Kataoka, K., Sahara, R., Ase, H.&Harada, T., Role of large-scale coherent structures in impinging jet heat transfer, J. Chem. Engng. Japan, 20-1 (1987), 71.

[125] Kestin, J., The Effect of Free-Stream Turbulence on Heat Transfer Rates, Adv. Heat Transfer, 3 (1966), 1.

[126] 鴨井新生, 田中英穂, 初期乱れ度を考慮した二次元衝突噴流に関する研究(第1報, 自由噴流の特性に及ぼす初期乱れの影響), 日本機械学会論文集(第2部), 43-371 (1977), 2569.

[127] Popil, C.O.&Trass, O., Visualization of a free and impinging round jet, Exp. Thermal Fluid Sci., 4 (1991), 235.

[128] Colucci, D.W.&Vislanta, R., Effect of Nozzle Geometry on Local Convective Heat Transfer to a Confined Impinging Air Jet, Exp. Thermal Fluid Sci., 13 (1996), 71.

[129] Hussain, A.K.M.F.&Ramjee, V., Effects of the Axisymmetric Contraction Shape on Incompressible Turbulent Flow, Trans. ASME J. Fluid Engng., (1976), 58.

[130] Obot, N.Y., Mujumdar, A.S.&Douglas, W.J.M., Effect of semi-confinement on impingement heat transfer, Proc. 7th Int. Heat Transfer Conf., 3 (1982), 395. (cited Jabunathan et al.(1992)

[4])

[131] Donaldson, C.D.&Snedeker, R.S., A study of free jet impingement; Part 1 Mean properties of force and impinging jets, J. Fluid Mech., 45-2 (1971), 281.

[132] Donaldson, C.D., Snedeker, R.S.&Margolis, D.P., A study of free jet impingement; Part 2 Free jet turbulent structure and impingement heat transfer, J. Fluid Mech., 45-3 (1971), 477.

[133] Gutmark, E., Wolfstein, M.&Wygnanski, I., The plane turbulent impinging jet, J. Fluid Mech., 88-4 (1978), 737.

[134] Adrian, R.J., Particle-Image Techniques For Experimental Fluid-Mechanics, Ann. Rev. Fluid Mech., 23 (1991), 261.

[135] Raffel, M., Willert, C.&Kompenhans, J., Particle Image Velocimetry, Springer-Verlag Berlin (1998).

[136] Krothapalli, A., Rajkuperan, E., Alvi, F.&Lourenco, L., Flow field and noise characteristics of a supersonic impinging jet, J. Fluid Mech., 392 (1999), 155.

[137] Diddon, N.&Ho, C, -M., Unsteady separation in a boundary layer produced by an impinging jet, J. Fluid Mech., 160 (1985), 235.

[138] Gardon, R.&Akfirat, J.C., Heat Transfer Characteristics of Impinging Two-Dimensional Air Jets, Trans. ASME J. Heat Transfer, 88-1 (1966), 101.

[139] 一宮浩市, 保坂宣夫, 3-スリット･ノズルによる衝突噴流熱伝達の特性について, 第25回日本伝熱シンポジウム講演論文集 (1988), 34.

[140] 一宮浩市, 保坂宣夫, 上壁を有する衝突噴流熱伝達の特性に関する実験的研究(3-スリット･ノズルによる伝熱特性), 日本機械学会論文集(B編), 55-518 (1989), 3210.

[141] Gao, X.&Sunden, B., Heat transfer measurements of impinging two-dimensional slot jets, Exp. Heat Transfer, Fluid Mech. Thermodynamics 2001, ed., Celata, G.P. et al., (2001), 1081.

[142] 森康夫, 内田豊, 小泉博義, 衝突噴流群による高温壁の冷却, 日本機械学会論文集(B編), 54-502 (1988), 1434.

[143] Elbanna, H.&Sabbagh, J.A., Flow Visualization and Measurements in a Two-Dimensional Two-Impinging-Jet Flow, AIAA J., 27-4 (1989), 420.

[144] Miller, D.R.&Coming, E.W., Force-momentum fields in a dual-jet flow, J. Fluid Mech., 7-2 (1960), 237.

[145] 田中栄一, 二次元平行噴流の干渉(第1報,平行2噴流の干渉の実験), 日本機械学会論文集(第2部), 35-274, (1969), 1257.

[146] TANAKA, E., The Interference of Two-Dimensional Parallel Jets (1st Report, Experiments on Dual Jet), Bull. JSME, 13-56 (1970), 272.

[147] 吉川進三, 能登勝久，噴流によって誘起される二次的流れに関する研究(第1報，複噴流の場合)，日本機械学会論文集(第2部)，38-312 (1972), 2035.

[148] 田中栄一, 二次元平行噴流の干渉(第2報,平行2噴流合流後の流れ),日本機械学会論文集(第2部), 39-327 (1973), 3386.

[149] 田中栄一, 二次元平行噴流の干渉(第3報,平行3噴流のノズル壁近傍における流れの形態),日本機械学会論文集(第2部), 41-342 (1975), 537.

[150] Becker, H.A.&Booth, B.D., Mixing in the Interaction Zone of Two Free Jets, AIChE J., 21-5 (1975), 949.

[151] Murai, K., Taga, M.&Akagawa, K., An experimental study on confluence of two two-dimensional jets, Bulletin of the JSME, 19-134 (1976), 958.

[152] Masters, G.F., Interaction of Two Plane, Parallel Jets, AIAA J., 15-12 (1977), 1756.

[153] Yuu, S., Shimoda, F.&Jotake, T., Hot-Wire Measurement in the Interacting Two-Plane Parallel Jets, AIChE J., 25-4 (1979), 676.

[154] Elbanna, H.&Gahin, S., Investigation of two plane parallel jets, AIAA J., 21-7 (1983), 986.

[155] 岡本哲史, 八木田幹, 渡辺晃, 川村高星, 2つの平行円形乱流噴流の相互作用, 日本機械学会論文集(B編), 50-456 (1984), 1848.

[156] Elbanna, H.&Sabbagh, J.A., Interaction of Two Non-equal Jets, AIAA J., 24-4 (1986), 686.

[157] Elbanna, H.&Sabbagh, J.A., Interaction of Two Non-equal Plane Parallel Jets, AIAA J., 25-1 (1987), 12.

[158] Ko, N.W.M.&Lau, K.K., Flow Structures in Initial Regions of Two Interacting Parallel Plane Jets, Exp. Thermal Fluid Sci, 2 (1989), 431.

[159] Lin, Y.F.&Sheu, M.J., Investigation of two plane paralleltunven ilated jets, Exp.Fluids, 10 (1991), 17.

[160] Elbanna, H.&Sabbagh, J.A., The Characteristics of the Flow Field of Combined Jets, J. Fluid Control (1990), 42.

[161] Lin, Y.F.&Sheu, M.J., Interaction of parallel turbulent plane jets, AIAA. J, 29-9 (1990), 1372.

[162] 新美智秀, 藤本哲夫, 田老伸匡, 複数の平行超音速自由噴流が干渉した流れ場の解析, 日本機械学会論文集(B編), 59-567 (1993), 3325.

[163] Nasr, A.&Lai, J.C.S., Two parallel plane jets: mean flow and effects acoustic excitation, Exp.Fluids, 22 (1997), 251.

[164] Nasr, A.&Lai, J.C.S., Strongly Interacting Two Parallel Plane Jets, JSME CENTENNIAL GRAND CONGRESS International Conference on Fluid Engineering, JSME ICFE-97-102 (1997), 117.

[165] Lai, J.C.S.&Nasr, A., Comparison of flow characteristics in the near field of two parallel plane jets and an offset plane jet, Phys. Fluids, 9-10 (1997), 2919.

[166] Green, M.R.&Cringhton, D.G., Instability properties of interacting jets, J. Fluid Mech., 350 (1997), 331.

[167] Lai, J.C.S.&Nasr, A., Weakly Interacting Two Parallel Jets, Laser Technique Applied to Fluid Mechanics, (Lisbon), Springer, 1998.

[168] 張間貴史, 藤田重隆, 大坂英雄, 噴流中心間距離が異なる2円形自由噴流の混合拡散過程, 日本機械学会1999年度年次大会講演論文集(IV) (1999), 43.

[169] 山田日出夫, 武藤健, 夏目雅巳, 倉橋達也, 内藤隆, 中島恵, 拘束平行2噴流の可視化実験, 日本機械学会東海支部第49期総会講演会講演論文集 (2000), 61.

[170] 中村功一, 藤沢延行, 高野剛, 山口智弘, 近接二平面噴流の流動特性に関する研究, 日本機械学会北陸信越支部第38期総会講演会論文集 (2001), 353.

[171] Anderson, E.A.&Spall, R.E., Experimental and Numerical Investigation of Two-Dimensional Parallel Jets, Trans. ASME J. Fluid Engng., 123 (2001), 401.

[172] Nasr, A.&Lai, J.C.S., Effects of nozzle spacing on the development of two parallel plane jets, Int. J. Transport Phenomena, 2-1 (2000), 43.

[173] 日本機械学会･編, ハンドブック次世代技術と熱, 技報堂出版, 1993.

[174] 棚澤一郎, 単相強制対流伝熱の促進技術, 日本冷凍協会論文集, 5-1 (1988), 1.

[175] 棚澤一郎, 伝熱促進技術の考え方と応用, 熱流体フォーラムシリーズ1｢熱流体とエネルギー｣, 日刊工業新聞社, 1996.

[176] 萩原良道, 伝熱促進･制御技術と基本原理, 日本機械学会講習会教材 熱と熱輸送-そのサイエンスとエンジニアリング入門-, No.910-45 (1991), 57.

[177] 相原利雄, 伝熱制御の現状と将来(3), 機械の研究, 43-8 (1991), 869.

[178] 片岡邦夫, 衝突噴流を利用した伝熱制御, 日本機械学会誌, 93-864 (1990), 910.

[179] 相原利雄, 伝熱制御の現状と将来(1), 機械の研究, 43-6 (1991), 641.

[180] 相原利雄, 伝熱制御の現状と将来(2), 機械の研究, 43-7 (1991), 771.

[181] 相原利雄, 伝熱制御の現状と将来(4), 機械の研究, 43-9 (1991), 979.

[183] Husain, H.S.& Hussain, F., Elliptic Jets. Part 2. Dynamics of Coherent Structure Paring, J. Fluid Mech., 233 (1991), 439.

[184] Husain, H.S.& Hussain, F., Elliptic Jets. Part 3. Dynamics of Preferred Mode Coherent Structure, J. Fluid Mech., 248 (1993), 315.

[185] 米坂考, 豊田国昭, 白浜芳郎, 楕円噴流に関する実験的研究, 日本機械学会第71期通常総会講演会講演論文集(�V) (1994), 310.

[186] 豊田国昭, 白浜芳郎, 小谷幸慈, 渦構造の操作による非円形噴流の制御に関する研究, 日本機械学会論文集(B編), 58-545 (1992), 7.

[187] 豊田国昭, 噴流の渦構造とその制御, 日本機械学会1999年度年次大会講演論文集(IV) (1999), 63.

[188] Mi, J., Nathan, J.&Luxton, R.E., Centerline mixing characteristics of jets from nine differently shaped nozzles, Exp. Fluids, 28 (2000), 93.

[189] 親川兼勇, 屋我実, 那須謙一, 瀬吊波出, 松田昇一, 安座間工, 十字形噴流の衝突熱伝達, 日本機械学会論文集(B編), 63-607 (1997), 979.

[190] Lee, S.?J., Lee, J.-H.&Lee, D.-H., Local heat transfer measurements from an elliptic jet impinging on a flat plate using liquid crystal, Int. J. Heat Mass Transfer, 37-6 (1994), 967.

[191] Lee, S.?J.&Lee, J.-H., The effect of nozzle aspect ratio on stagnation region heat transfer characteristics of elliptic impinging jet, Int. J. Heat Mass Transfer, 43 (2000), 555.

[192] 檜和田宗彦, 築地優, 佐藤寛, 田中光三, 親川兼勇, 非円形衝突噴流の熱伝達特性(オリフィス形状の影響), 第36回日本伝熱シンポジウム講演論文集 (1999), 313.

[193] 檜和田宗彦, 田中真太郎, 田中光三, 親川兼勇, 衝突噴流熱伝達に及ぼすタブの影響, 日本機械学会論文集(B編), 66-647 (2000), 1812.

[194] Hiwada, M., Tanaka, S., Tanaka, K.&Oyakawa, K., Effect of Tabs on Impinging Heat Transfer, Heat Transfer ? Asian Research, 30-7 (2001), 561.

[195] 片岡邦夫, 浜田剛孝, 浜野真一, 南浦健二, 朝倉宏, 大きなスケールの乱れ渦衝突による伝熱制御, 第25回日本伝熱シンポジウム講演論文集 (1988), 31.

[196] Haneda, Y., Tsuchiya, Y., Nakabe, K.&Suzuki, K., Enhancement of impinging jet heat transfer by making use of mechano-fluid interactive flow oscillation, Int. J. Heat Fluid Flow, 19 (1998), 115.

[197] 羽田喜昭, 土屋良明, 倉澤英夫, 中部主敬, 鈴木健二郎, 二次元衝突噴流中に設置した弾性支持円柱が及ぼす流れ場および熱伝達への影響, 日本機械学会論文集(B編), 66-644 (2000), 1176.

[198] Haneda, Y., Tsuchiya, Y., Kurosawa, H., Nakabe, K.&Suzuki, K., Flow Field and Heat Transfer of a Two-Dimensional Impinging Jet Distributed by an Elastically Suspended Circular Cylinder, Heat Transfer ? Asian Research, 30-4 (2001), 313.

[199] Ali Khan, M.M., 笠木伸英, 平田賢, 衝突噴流熱伝達の増進技術に関する研究(第4報), 第18回日本伝熱シンポジウム講演論文集 (1981), 199.

[200] 栗間淳二, 宮本政英, 原田俊光, 衝突壁上流に多孔板を設置した軸対称衝突噴流の伝熱促進(第1報, 多孔板の孔径および孔ピッチの効果), 日本機械学会論文集(B編), 54-503 (1987), 1736.

[201] Beitelman, A.H., Saad, M.A.&Patel, C.D., The effect of inclination on the heat transfer between a flat surface and an impinging two-dimensional air jet, Int. J. Heat Fluid Flow, 21 (2000), 156.

[202] Perry, K.P., Proc. Inst. Mech. Eng., London, 168 (1954), 775. (cited Matrin(1977)

[1])

[203] Goldstein, R.J.&Franchett, M.E., Heat Transfer From a Flat Surface to an Oblique Impinging Jet, Trans. ASME J. Heat Transfer, 110 (1988), 84.

[204] Ali Khan, M.M., 笠木伸英, 平田賢, 衝突噴流熱伝達の増進技術に関する研究(第5報), 第18回日本伝熱シンポジウム講演論文集 (1981), 208.

[205] Ward, J.&Mahmood, M., Heat Transfer from a Turbulent, Swirling, Impinging Jet, Proc. 7th Int. Heat Transfer Conf., Vol.3 (1982), 401.

[206] Volchkov, E.P., Lukashov, V.V.&Semenov, S.V., Heat Transfer in an Impact Swirling Jet, Heat Transfer Research, 27 (1996), 14.

[207] 白浜芳郎, 豊田国昭, 励起法による噴流の制御, 日本機械学会第69期全国大会講演会講演論文集, Vol.B (1991), 244.

[208] Hussain, F.&Thompson, C.A., Controlled symmetric perturbation of the plane jet: an experimental study in the initial region, J. Fluid Mech., 100-2 (1980), 397.

[209] Thomas, F.O.&Goldschmidt, V.W., Acoustically induced enhancement of widing and fluctuation intensity in a two-dimensional turbulent jet, J. Fluids Engng. Trans. ASME, 109 (1986), 331.

[210] 蒔田秀治, 大谷秀雄, 石角勝利, 音波による噴流構造の制御(第2報,スペクトル分布と速度場の流れ方向変化について), 日本機械学会論文集(B編), 54-504 (1988), 1946.

[211] 蒔田秀治, 松元毅, 朝倉忠裕, 二次元噴流の遷移過程(第1報, 渦度分布と渦の移動速度), 日本機械学会論文集(B編), 57-539 (1991), 2239.

[212] 蒔田秀治, 松元毅, 長谷川敏行, 二次元噴流の遷移過程(第2報, 多線式煙線法による可視化写真と速度ベクトル図の比較), 日本機械学会論文集(B編), 58-555 (1992), 3237.

[213] 蒔田秀治, 松元毅, 佐々浩司, 励起された二次元噴流の秩序渦構造, 航空宇宙技術研究所特別資料, 15 (1993), 5.

[214] 蒔田秀治, 長谷川敏行, 二次元噴流の遷移過程におけるレイノルズ応力分布, 日本機械学会論文集(B編), 60-577 (1994), 2984.

[215] 関下信正, 蒔田秀治, 三好秀昌, 二次元噴流中に存在する渦構造の合体･抑制の制御, 日本流体力学会年会2000講演論文集 (2000), 523.

[216] 関下信正, 蒔田秀治, 渡邊篤史, 音波励起された二次元噴流中の渦構造の三次元的変形, 日本流体力学会年会2000講演論文集 (2001), 461.

[217] Hsiao, F.B.&Huang, J.M., On the evolution of instabilities in the near field of a plane jet, Phys. Fluids, 2 (1990), 400.

[218] Husain, H.S.&Hussain, F., Experiments on subharmonic resonance in a shear layer, J. Fluid Mech., 304 (1995), 343.

[219] Gutmark, E.&Ho, C.-M., Preferred modes and the spreading rates of jets, Phys. Fluids, 26-10 (1983), 2932.

[220] 片岡邦夫, 阿瀬尚, 迫紀幸, 励起噴流による乱流伝熱機構, 第24回日本伝熱シンポジウム講演論文集 (1987), 139.

[221] 小幡輝夫, 平野功, 秋山光庸, 音波で励起された円形衝突噴流の平板熱伝達特性, 日本機械学会論文集(B編), 67-658 (2001), 1438.

[222] 栗間淳二, 高松大輔, 宮本政英, 平田賢, 軸対称励起噴流の渦輪挙動と衝突熱伝達, 第34回日本伝熱シンポジウム講演論文集 (1997), 13.

[223] Hwang, S.D., Lee, C.H.&Cho, H.H., Heat Transfer and Flow Structures in Axisymmetric Impinging Jet Controlled by Vortex Paring, 3rd Int. Sympo. Turbulence, Heat and Mass Transfer (2000),571.

[224] 榊原潤, 菱田公一, 励起された二次元衝突噴流のよどみ域の渦構造, 日本機械学会論文集(B編), 62-596 (1996), 1369.

[225] 榊原潤, 菱田公一, 励起された二次元衝突噴流のよどみ域の熱伝達, 日本機械学会論文集(B編), 62-597 (1996), 1962.

[226] 社河内敏彦, 安田光博, 安藤俊剛, 若松朋宜, 同軸環状副噴流による円形衝突噴流の制御に関する研究(流動特性に対する速度比の影響), 日本機械学会論文集(B編), 61-589 (1995), 3251.

[227] 檜和田宗彦, 熊田雅弥, 親川兼勇, 田中光三, 同軸2重円形衝突噴流による伝熱制御, 第32回日本伝熱シンポジウム講演論文集 (1995), 381.

[228] 早川道雄, 森島隆二, 飯田誠一, 平面噴流の発達に及ぼす周期撹乱の効果, 日本流体力学会年会講演会講演論文集 (1999), 133.

[229] 早川道雄, 森島隆二, 飯田誠一, 周期撹乱で励起された平面噴流の特異な応答, 日本流体力学会年会講演会講演論文集 (2000), 501.

[230] Abe, M., Yoshida, N., Hishida, K.&Maeda, M., Multilayer PIV technique with high power pulse laser diodes, Proc. 9th Int. Symp. Appl. Laser Tech. Fluid Mech., Lisbon (1998), 13.

[231] 西尾茂文, 河村洋, 笠木伸英, 吉田豊明, 伝熱研究における温度測定法, 養賢堂, 1985.

[232] Baughn, J.W., Liquid crystal methods for studying turbulent heat transfer, Int. J. Heat Fluid Flow, 16 (1995), 365.

[233] White, F.M., Viscous Fluid Flow (second edition), McGraw-Hill, Inc., 1991.

[234] Zaman, K.B.M.Q.&Hussain, A.K.M.F., Vortex paring in a circular jet under controlled excitation. Part 1. General jet response, J. Fluid Mech., 101-3 (1980), 449.

[235] Hussain, A.K.M.F.&Zaman, K.B.M.Q., Vortex paring in a circular jet under controlled excitation. Part 2. Coherent structure dynamics, J. Fluid Mech., 101-3 (1980), 493.

[236] 親川兼勇, 松田昇一, 屋我実, 玉城厚司, 長円形2噴流の衝突熱伝達特性, 日本機械学会論文集(B編), 65-637 (1999), 3084.

[237] Metzger, D.E.&Korstad, R.J., Effects of Crossflow on Impingement Heat Transfer, Trans. ASME J. Eng. Power, 94 (1972), 35.

[238] Obot, N.T.&Trabold, T.A., Impingement Heat Transfer Within Arrays of Circular Jets: Part1 ? Effects of Minimum, Intermediate, and Complete Crossflow for Small and Large Spacing, Trans. ASME J. Heat Transfer, 109 (1987), 872.

[239] 野崎篤志, 山本和之, 菱田公一, 平行平面衝突噴流群による熱伝達制御, 第38回日本伝熱シンポジウム講演論文集 (2001), 31.

[240] 山本和之, private communication (2002).

[241] 羽二生博之, 坂本弘志, 田中大介, 小畑芳弘, 渦放出の完全ロックイン領域における上規則特性(渦形成長さの変動特性), 日本機械学会論文集(B編), 62-595 (1996), 833.

[242] 桝川高久, 周期的外乱によるバックステップ流の再付着機構, 慶應義塾大学院機械工学専攻, 修士論文, 1996.